Powder technology is an important process in the production of advanced ceramics. Due to the increasingly fine requirements for raw materials in various manufacturing processes and application performance, in order to improve the flowability and tight crystallization of the powder, it is necessary to grind, screen, and dry the powder, namely granulation powder, to evenly fill the model, in order to improve the molding density of the green body and ensure the sintering density after porcelain production.

Some product parameters are as follows:

1. Average particle size: between 2.5 microns and 3.5 microns;

2. Particle size distribution: 60-120 mesh ratio 60-67%;

3. Moisture content: controlled below 0.15%;

4. Loose density: 1.15-1.25g/cm3;

5. Liquidity: 55-62s.